请问:蓝盾的控制键和TV对目标的锁定/解锁键是哪些…！

corel3

请问:蓝盾tv开启后用什么键控制其摄像机移动啊？
如何锁定解锁我的目标呢？

mbzps

A-10C的安装文件夹中有个DOC文件夹，DOC文件夹里有一个“short-manual-eng”的PDF文件，里面有起降、SOI设置、TGP使用、各类武器的投放的简要说明，可以看一下。

The TGP diamond can be moved using the
SLEW CONTROL switch or "," "." "/" ";" keys
on the keyboard. You can select between
wide field of view (further from the target)
and narrow field of view (closer to the target)
by pressing the CHINA HAT forward
command or V on the keyboard. You can
also zoom the camera by pressing the DMS
UP/DOWN commands or HOME/END on
the keyboard. The camera has two stabilization
modes: AREA track and POINT track.
POINT track can be used to track a specific
object, such as a moving vehicle. Press TMS
UP (LCTRL+UP) to select tracking modes.
Once you are tracking your desired target,
press and hold TMS UP (LCTRL+UP) to designate
the target.
Press the TGP select button and watch for the TGP OFF indication to appear. Select A-G
(Air to Ground) mode by pressing the A-G select button. The display will now show a
video picture from the TGP camera. Make the TGP display SOI by pressing the TGP select
button at the bottom of the MFCD once more. A diamond will appear on the HUD
to indicate the location of the TGP view.
TGP view diamond
on the HUD
Once the target is designated, the target line will appear on the HUD and the "wedding
cake" will appear over the target position on the TAD map as discussed previously in the
HUD designation section.
To re-center the camera, press the CHINA HAT aft command or C on the keyboard.

corel3

哦了，THX :)