用X-52玩BMS,觉得不好操控的进

subtor

在benchmarksims论坛发现个帖子:
http://www.benchmarksims.org/forum/showthread.php?5752-X52-and-others-sensitivity
内容如下:
As we all noticed, the flight model is different in this BMS.

Some users of an X52 (I have the old one) and maybe other users might want a less sensitive joystick. There's no real config option for that in the game, and my X52 at least, doesn't have curves in the programming.

To decrease your sensitivity, add these lines in your falcon bms.cfg:
Don't just copy them.. read on please..

set g_fJoySOISpeedX 0.7
set g_fJoySOISpeedY 0.7
set g_fJoySOISpeedRZ 0.6

It says, SOI speed, but it actually works on the sensitivity of the axes you put here.

X and Y are my stick X and Y axes, RZ is my rudder axes.
You'll have to double-check the naming of the axis on your stick before using these lines, and change the X, Y or RZ to your axes name.

For instance, if your rudder is called the Z axes, add the line set g_fJoySOISpeedZ 0.6 for your rudder.

The number is default 1.0
it is a factor that is multiplied to the stickaxis.
To decrease, make it 0.8 or 0.7 or even 0.6 for the rudder.
Try different values to get the setting you like.

Have fun with your new flexible sensitivity.
It'll be less sensitive in the center positions, and you'll still have the full deflection to pull 9.5 G's (tried and tested)

overstrain

设置设置还是可以用的，如果有X52 SST高级编程还不会的话那就是浪费了X52，SST高级编程会用的话，X52会提升到很高的水平。

foxwxl

根据我现在飞的经验，X/Y轴问题不大，在游戏里面死区和饱和度全部设为0。但是舵基本一定需要曲线，否则手舵一定会引起飞机震荡。。。。。。。。。

2010123

这个帖子太好了~~！！ 又给我们空中加油 带来了希望！！  原来有点灵活呀！！

foxwxl

我设置成0.5了，震荡小很多了。。。。。可以微调舵了