WDP V3.5更新 2013-02-04【武器投放及DTC设定工具】

Regulus

http://www.weapondeliveryplanner.nl/download/index.html

Features in the current version of WDP:
Multiple theatres support Aegean theatre Balkans theatre Middle East theatre Korea theatre Nevada theatre
Datacard management shows all relevant data for the flight. Easy to share or print
Coordinationcard shows all relevant data for the Package. Quick reference for managing your Package.
Performance Airport information including airport chart Optimal climbspeeds (AB or MIL climb) and time to planned altitude Cruisepeeds, cruise ceiling, optimal cruise alt, service ceiling
DTC management Save your settings and reload them with one click for different missions Share the datacards with squadronmates and one click upload to the DTC in Falcon. Steerpoints: Manage steerpoints and lines EWS: Manage and save your chaff and Flare settings including bingo, timing etc MFD: Set you MFDs so once you jump into your pit they are ready for the specific mission Radio/Nav: Set your frequencies. Presets will be in the pit after DTC loading Nav offsets: Set your nav offsetpoints for your attackprofile Systems: Set your systems like HUD, Vieuwsettings, ALOW, gunsettings, MasterARM Weapons: Set your AA and AG weapons. Timing delay, fuses, autopower etc
Map management Change mapsettings and display the lines on your HSD in Falcon Have WDP set relevant Pre Planned Threats (PPT) automatically Reset Bulls Eye Tanker tracks automatically added Make or edit lines
Attackprofiles Plan your strike method, choose strikeprofiles and save to DTC Popup attack High Altitude Dive Bombing (HADB) TOSS attack
Threat and Munitions database WDP comes with a full database on threats and munitions for quick reference Extensive information on threats like SAM Systems, SAM missiles and radars Including threat RWR warning sounds and RWR symbol Munition information and calculation of MRA and time to impact for optimal munition choice

overstrain

一直在用~

Regulus

overstrain 发表于 2012-1-15 21:30
一直在用~

我就知道该早点回地球的

hezy

Regulus 发表于 2012-1-15 21:31
我就知道该早点回地球的

地球人欢迎您

Regulus

hezy 发表于 2012-1-15 21:44
地球人欢迎您

你好，地球人

foxwxl

还在用2.6的路过

Regulus

Version 2.8 released for WDP

Datacard


- The map will be saved if you save the datacard. Map can be found in the same directory as the datacard.
- On the flightplan you will find the planned Mach as well as the GS.
- Fixed, when a mission was loaded, clicking on a empty fuel box in the flightplan, it would return a zero.
- JSTARs are taken from mission file and added to the datacard.
- CAP time is taken into account for the calculation of the GS on the flightplan.
- Flightplan time shows the end time of a CAP on the last STPT.
- Flightplan is showing Takeoff, Arrival and departure elevation at the respective STPT.
- Tankers can be selected from a combobox. press the little button to see the combobox.
- Selected runways are saved when saving the datacard.
- Map location and zoom is saved in the backup datacard file. Loading a datacard will set the maps location and zoom.
- Fixed, in a few cases the order of flight in a package was not correct resulting in wrong IDM numbers assignment.
- Pitch and power values are saved with the datacard.Loading the datacard will set these values again.
- Fixed, No more recalculation of fuel when changing fuel at alternate.
- VHF assignment is automatic, but can still be changed.
- Tacan assignment is automatic, but can still be changed.



Coordinationcard

- Added first version of the coordinationcard.



DTC

- Fixed, Clear line button, deletes the line.
- Load Mission.ini, browse button will get you to the latest file.



Map

- Map will automatically focus and zoom on the selected flight.
- AutoPPT improved.
- When loading a mission, the tankertracks are added to the Area database. Go to change line and you find the Tankername in the list of areas.



Selection


- Added takeoff time of first flight of the package.
- Added Current Time of the mission.
- Fixed, When the loadout is taken from a mission file (TE or Cam) the pylons/racks drag/weight is added correctly.
- Fixed, Optimum mach not correct value in some cases.


Performance & Loadout


- Fuel used from the mission file is used in total fuel calculation.
- Speed option in Speed combobox set to 10kts steps.
- Improved the selection of the weapons.



Go to the downloadpage to check it out.


http://www.weapondeliveryplanner.nl/news.html
19 January 2012

ZMFID

E盲，这是什么东西啊？干什么用的？

Regulus

ZMFID 发表于 2012-2-17 13:51
E盲，这是什么东西啊？干什么用的？

一个用于BMS的任务规划工具

ZMFID

Regulus 发表于 2012-2-17 14:18
一个用于BMS的任务规划工具

谢谢，连冷启动还都没搞明白，这个就算了。

overstrain

3.2已发布，大家可以更新一下，这东西是越做越好了，再这么下次，我都要OUT了，这个工具应该作为BMS必备工具进行使用。

foxwxl

已经更新到3.3了，支持以色列战役

F风

又更新到3.4了.....