黑鲨正版DVD补丁安装顺序，还有配平为何不好用！（问题解决）

simondhy · 发表于 2010-7-21 22:46:44

本帖最后由 simondhy 于 2010-7-22 22:10 编辑

本人正版的DVD黑鲨，安装补丁顺序是1.01C——1.02，但进入游戏发现T键配平不好用，导致飞的时候需要长时间压杆，请问原因！

cfz8688 · 发表于 2010-7-21 23:18:07

升级以后确实T键陪平废了

SkieRider · 发表于 2010-7-21 23:21:21

配平正常的路过。。。。注意检查选项中的配平方式

qiqi2862003 · 发表于 2010-7-22 09:58:24

很多键位好像都改变了，你先要进键位表看看

305L7 · 发表于 2010-7-22 10:55:19

我也是按楼主的顺序装的，感觉升级到1.02后配平更好用了。貌似选项里有个关于配平的选项要选上，不懂E文，不知道怎么翻译！

cfz8688 · 发表于 2010-7-22 10:57:18

啊…中点配平…那个我记得在1.02汉化包里是翻译过的…

simondhy · 发表于 2010-7-22 21:38:36

哦是吗？我还真没看，我到按键中看看，谢谢了！

simondhy · 发表于 2010-7-22 21:50:05

我选了中点配平，但在快速游戏中还是不好用呀，我看了键位还是T是配平，RCtrl+T是取消配平呀

foxwxl · 发表于 2010-7-22 22:07:01

NEW TRIMMER IMPLEMENTATION

In addition to the original trimmer implementation, in which control input is disabled for 1 second to allow the player to quickly re-center his controls, a new method is included in version 1.0.1, using a different re-centering logic. In the new method, control input is disabled until the player returns the controls to their neutral position. This allows the player to re-center his controls smoothly, minimizing unwanted control input.

The new trimmer logic is optional and is selected ON by default upon installation of the patch. Selection of the trimmer implementation is available in the GAMEPLAY menu of the game options.

The Yaw (heading) autopilot channel functionality has also been redesigned. If the yaw rate is under 3 deg/sec. when the trimmer button is released, the autopilot will stabilize the helicopter heading. If the yaw rate is greater than 3 deg/sec., the autopilot will stabilize the yaw rate to maintain the turn.

The control deadzone for the new trimmer implementation can be adjusted in the following configuration file:
...Scripts\Aircrafts\_Common\FMOoptions.lua

The relevant variables are:

HelicopterTrimmerMethod - trimmer implementation option: 1 - original, 2 - new (selected by default).

The default neutral positions (deadzone) to which the player must return his controls to reactivate control input (in % of half of the controls' full motion!)
HelicopterTrimmerZonePitch = 0.05 (5% in pitch)
HelicopterTrimmerZoneRoll = 0.05 (5% in roll)
HelicopterTrimmerZoneRudder = 0.1 (10% in yaw)

HelicopterTrimmerTauInverse = 7.0 - time factor for the period given the player to re-center his controls when using the original trimmer implementation.

IMPORTANT! All of the above values are recorded for track playback. Do not use the Windows� Notepad to edit LUA files. A text editor with full UTF-8 compatibility is required when editing the configuration files.

simondhy · 发表于 2010-7-22 22:10:21

问题解决！原因是：你是否还插入了其他控制设备比如方向盘什么的？请拔除它。或者在\...\Config\Producer.cfg 中将ForceFeedbackEnabled从"true"设置为"false"

		自动登录	找回密码
密码			注册

[提问] 黑鲨正版DVD补丁安装顺序，还有配平为何不好用！（问题解决）