A10C CCIP INVALID解决办法

wdw199034

If the target is at an elevation higher than the current aircraft altitude (target on a hill
higher than
your current altitude
for instance), the system cannot generate proper target a
ltitude and a “CCIP
INVALID” message will appear on the HUD.  To attack such a target accurately, you have two
options:
1.
Increase altitude above target altitude
2.
Switch to 4/8/12 Gun Reticle or 4000
-
Foot Wind Corrected Gun Cross


我查阅了他人的办法，说把目标始终设置为DTS的高程.
在CCIP模式下，IFFCC为了计算CCIP解决方案，需要知道Pipper点的高度，这个高度既可以是基于当前航向点的HOT高度，也可以是存储于数字地图数据库的数字地形系统高度。如果Pipper使用HOT高度且低于当前航向点高度，就会报“CCIP INVALID”错误。除非数字地形系统故障，应该始终使用数字地形高度，可以用UFC的DATA和SEL跷板开关选择Pipper参考高度为DTS。

L0op8ack

手册里面写着呢

wdw199034

L0op8ack 发表于 2016-5-13 01:23
手册里面写着呢

能告诉我怎么做吗？

wdw199034

The solution for CCIP Invalid is;

- HUD SOI,

- From UFC Panel:
"Pg DATA" Down (at HUD, lower right corner, it shows the elevation of "steerpoint" flashes)

- Use "SEL" to change it to DTS

End of problem

Greetings

Edit: OOps, writing at the same time, sorry